Aluminum alloy fume hood

one The frame and box body adopt the national standard 1.2mm professional mold forming aluminum structure. The metal surface is sprayed with epoxy resin high-voltage electrostatic powder after pickling, phosphating and other chemical rust prevention treatment.

two The table top adopts imported physical and chemical board table top or Sino US joint venture Fumei plus solid core physical and chemical board table top, with a standard thickness of 12.7mm, strong acid-base resistance and various organic reagents, good scratch resistance and not easy to bend and deform. In order to ensure better load-bearing and bending resistance, the edge is thickened to 25.4mm, and the four sides are polished.

three The inner lining plate and deflector are lined with 6mm thick corrosion-resistant and anti octave plate imported from the United States, with three air channel vortex exhaust design, and are equipped with reasonable diversion structure. The exhaust is smooth without dead angle, and various specific gravity gases can be smoothly discharged from the cabinet.

four The window is designed as 5mm thick tempered glass with high transparency and safety. The window door is designed as a window slide. It can be opened up and down flexibly and conveniently with low noise. The maximum range that can be opened up and down is 760mm. The rubber damping cushion block is designed at the bottom of the sliding door, which solves the problems of rust, corrosion, discoloration and beauty of the fume hood in the harsh environment with high concentration of acid and alkali and heavy water and gas.

five 220 V 30W explosion-proof fluorescent lamp is equipped on the top plate.

six The water basin is made of high-density PP material, which is resistant to strong corrosion (such as aqua regia), with a wall thickness of 7mm, flat and free from deformation. Surface texture: the groove edge surface is treated as skin texture, resistant to engraving and scraping, which is consistent with the surface texture of most table panels; accessories: high-density PP water removal filter, water blocking cover and PP water removal cage. The size is 260 * 140 * 170.

seven The faucet adopts the thickened copper moulded triple or single faucet specially used in the laboratory, the valve adopts the porcelain valve, and the surface is sprayed with epoxy resin to prevent acid and alkali, corrosion and heat. Wall remote control water valve, 90 degree rotation, service life, 500000 times of switching, static maximum withstand voltage of 20 PA.

eight The power supply 10A or 16A three pole multifunctional socket has dust-proof, acid-base proof and waterproof design, and is equipped with leakage protection switch.

nine The power distribution device includes a comprehensive performance control system composed of power control, fan control, lighting control, air volume regulation and instrument power control, and is equipped with 30W lighting light pipe. All devices are international famous brand products, and are equipped with automatic exhaust and power-off delay control system devices.

ten The exhaust system adopts famous brand fans with corrosion-resistant, explosion-proof, low energy consumption and low noise, and the working noise of the system is not higher than 60 dB. Multiple units are combined with frequency conversion and programming intelligent control.